georgia-market.com moderated newsgroup and market bazzar   >   Waycross   >   Electronics   >   New doo-bee stops, (a set of 2) model: dbs-1000 product

New doo-bee stops, (a set of 2) model: dbs-1000 product


Click Images For More Info Or To Enlarge
Yes A First and only sold here
It is a totally new product owned by DynaPowernamics Inc.® and is just hitting the market as of lately. The new Doo-Bee Stop™ is a material stop that mounts on a milling machines vise jaws. These were made for the professional machinist/hobbyist and machine operator OR MODEL BUILDERS. This NEW tool not only has a much more reliable double bolt non-slip clamping pressure, for your production runs, insuring your production is ran perfect. It also has a WHOPPING clamping rang of .250 - 1.000 (1/4" - 1"inch) so one Doo-Bee Stop™ will fit any size vise jaw you will ever have, small or large. But the most important feature is the ability to hold a part as thin as .160 (5/32"inch) leaving the professional machinist with NO extra tooling that needs to be made and comes in really handy on those small thin parts that pop up on your production shelf.
Also, at the same time, it is increasing your production standards or shop efficiency, saving you time and money, if you are in a production environment. It is also a great tool for just about anybody including the hobbyists or week end metal heads…;-)
The single mounted Doo-Bee Stopâ„¢ can hold two parts on each side at the same time with a length of 1.500 that makes for a perfect part to part cooling distance for your cutters, saving you wear and tear on your cutters, at the same time doubling your production. Or you can double mount two Doo-Bee Stopsâ„¢ on your vise jaws to run FOUR PARTS AT ONE TIME as you will see in these photos.
It is spring-loaded for easy installation and removal and is made of carbon steel (not hardened), which can save your tooling in a crash. It is always better to run into a machinable material stop than a hardened one (my opinion) that can fry your expensive tooling in a matter of seconds. It also has a non-rust black oxide finish that can hold up to the rough of coolants.
This photo demonstrates the Doo-Bee Stop™ held at its smallest clamping position. As you see it is really a little smaller then .250 but DynaPowernamics Inc.® will claim an average of .250 minimum clamping range. This small range comes in really handy when you want to use the Doo-Bee Stop™ on small 3" inch air vises in a production run where the vise jaws are very thin in size.
This photo shows the side view of the Doo-Bee Stopâ„¢ at its wide open range. As you can see it is an easy 1.000 inch so you will have no problem installing this NEW PRODUCT on the beefiest of vise jaws. Works great also on those older machines that have a much larger vise jaw sizes. Also, you can see the material holding area that is just a little larger then .125 or 1/8" inch and it is claimed at .160 or 5/32" of an inch. I know of no others material stop on the market that is as heavy-duty having this small of part rage on the market today. I challenge anybody to find one if you can.
The Doo-Bee Stopâ„¢ was designed by a machinist for all professional machinists and machine operators or all metal working hobbyists, so get yours TODAY.
These two photos show how a machinist would use either one Doo-Bee Stopâ„¢ to run two parts at the same time. OR mount TWO Doo-Bee Stopsâ„¢ to run at WARP SPEED of four parts at the same time, mounted on an average 6" inch vise jaws. A MUST HAVE FOR ANY MACHINIST/ HOBBYIST OR ANY CNC OR MANUAL MACHINE OPERATORS.
The flat face construction allows easy cleaning off of chips and faster loading of the parts. These parts being ran in the photos above are .250 (1/4"inch) thick on the single mounted Doo-Bee Stopâ„¢, two parts at same time. On the double mounted Doo-Bee Stopâ„¢ running FOUR .375 (3/8"inch) thick parts at the same time, as you can see there is a lot more room to work with as far as running thinner parts without making any costly custom tooling, you have it all here ready to roll. Unlike other products on the market, there is no bulky bolt head or threads sticking in your way here with the NEW Doo-Bee Stopâ„¢ . It is completely adjustable at the front side with a clamping range of .250 (1/4"inch) to 1.00 (1"inch) one size fits all. It is recommended that you at least have a minimum of .062 or 1/16" of an inch vise jaw protrusion to clamp onto, but for best results use .125 (1/8"inch) of an inch vise jaw protrusion.
One of the nicest things about the New Doo-Bee Stop™ is that it doesn't take up hardly any room in your toolbox and is easy to clean off. AN ABSOLUTE MUST HAVE FOR ANY SERIOUS PROFESSIONAL MACHINIST OR METAL WORKING HOBBYIST. GET YOURS TODAY BEFORE THEY ARE SOLD OUT. You will only find these sold by DynaPowernamics Inc.® so add the New Doo-Bee Stop™ to your ARSENAL of machine shop tools today.
DynaPowernamics Inc.® is a advocate for the development of new products for the advancement of the manufacturing industries worldwide, that makes us earthlings everything we use.
History is always made in the machine shops, so it's time to
Click Here To See Some Parts Made Using The "Doo-Bee Stopâ„¢"
This info is aimed for non-machinist
BOOKMARK MY E-Bay STORE NOW so you can check out the
other NEW products on the way NEXT like these.
Levelj-Doo-Bee Stopâ„¢-R DONE SELLING NOW
Levelj-Soft Pad Stopâ„¢ -R Done Coming Soon
Levelj-L-Tach Toolâ„¢ -R Done Coming Soon
Levelj- Slimline Shieldâ„¢ -R Done Coming Soon
Leveln-The 1/4 Turnâ„¢ -R Done Coming Soon
NO6- ProClipâ„¢ - -oBComing SoonC
NO6-Speed Jawsâ„¢ - -oBComing SoonC
NO6- The HitMan Malletâ„¢ -oBComing SoonC
You will learn what all this stuff means later on when everything is fine tuned and finished.
NOL And hundreds more to come, stay tunedLON
By purchasing this product you will agree not to hold DynaPowernamics Inc.® or their suppliers responsible for any bodily harm or loss of life or any damages of any kind resulting from the misuse of this NEW product. Also by purchasing this New product you will agree that you are a responsible, competent or professional machinist/hobbyist that is experienced in the use of such equipment/tools.
Copyright © 2004 to 2006 DynaPowernamics Inc.® All Rights Reserved



New doo-bee stops, (a set of 2) model: dbs-1000 product