georgia-market.com moderated newsgroup and market bazzar > Waycross
> Construction
> Microchip PIC16C57RC/sp 8 bit cmos microcontroller nos
Microchip PIC16C57RC/sp 8 bit cmos microcontroller nos
MICROCHIP PIC16C57RC/SP 0.300" SKINNY DIP
THIS PART IS PROGRAMMABLE AS A LP/RC/XT/HS DEVICE!
OPERATES @ 20MHz WHEN 'HS' CONFIGURATION IS PICKED!
SAME MICRO USED IN ALL THE STAMP SERIES OF PRODUCTS!
INCLUDES 1EA 20MHz CRYSTAL & 1EA 28 PIN 0.300" SOCKET!
SELLING 1-32 PIC16C57RC/SP'S INDIVIDUALY!
Image Hosted by DEDAKI http://
WE'RE ALSO INCLUDING FREE OF CHARGE A NEW 28 PIN SKINNY DIP IC SOCKET WITH EACH PURCHASE SO YOU WILL NOT HAVE TO
GO OUT & FIND ONE. ALSO INCLUDED IS A 20MHz SMT MOUNT HC-49US CRYSTAL SO AGAIN YOU WILL NOT HAVE TO GO FIND ONE &
HAVE TO PAY ANOTHER S&H CHARGE. SO FOR EACH PURCHASE YOU GET 1 MICRO, 1 SOCKET FOR MICRO, & 1 20MHz TO CLOCK THE
MICRO. DESIGNS THEMSELVES ARE UP TO YOU.
EACH PURCHASE INCLUDES THE FOLLOWING, 1EA N.O.S. PIC16C57RC/SP MICRO IS A 0.300" SKINNY DIP PKG. 1EA 28
PIN SKINNY DIP PACKAGE IC SOCKET, & 1EA 20MHz SMT MOUNT HC-49US CRYSTAL. THIS IS FOR CLOCKING YOUR MPU
(YOU CAN REMOVE THE PAD UNDER THE CRYSTAL, BEND THE 2 LEGS STRAIGHT & THEN USE IT AS A THRU HOLE PART.)
A DATASHEET IS AVAILABLE ON THE INTERNET AT MNF'S WEBSITE'S OR CAN BE DOWNLOADED BELOW USING OUR LINK!
NOTE: PLEASE MAKE SURE YOUR PROGRAMMER IS ABLE TO PROGRAM THE MICRO'S OSCILLATOR CONFIG BIT AS SOME CHEAP
MODELS WERE NOT ABLE TO DO SUCH, ALSO REMEMBER THAT YOU DO NOT HAVE TO PROGRAM IT AS A 'HS' OSCILLATOR IF ALL
YOU NEED IS 4MHz, THAT IS A 'XT' OSCILLATOR. ANYWAY THESE TYPES WERE THE BEST AS THEY COULD BE PROGRAMMED TO BE
ANY OF THE 4 TYPES MICROCHIP MNF'D, THUS IF YOU RAN INTO A DESIGN THAT RAN AT 4MHz YOU WOULD NOT BE STUCK WITH A
MICRO THAT ONLY DID 8-20MHz. HENCE THESE ARE MPU'S WORTH EVERY PENNY WE ARE CHARGING FOR THEM!
THANKS FOR LOOKING AND GOOD LUCK!
Please look at my other items for sale!
Be sure to add us to your favorites list!
