georgia-market.com moderated newsgroup and market bazzar > Warner Robins
> Industrial
> Heavy Industrial machines
> Avr jtag ice clone debugger and programmer kit
Avr jtag ice clone debugger and programmer kit
Schematic (right-click, view image)
JTAG ICE clone debugger & programmer KIT
This is a DIY (Do-It-Yourself) assembly KIT implementation of the JTAG ICE clone for AVR microcontroller development and debugging. This JTAG ICE device is a simplified version of the original Atmel JTAG ICE device. Here is the original atmel jtag ice documentation.
* Compatible with AVR Studio 4.13
* Firmware upgradeable from AVR Studio
* Standard 10-pin AVR JTAG connector and cable
ATmega16, ATmega162, ATmega162V, ATmega165, ATmega165V, ATmega169, ATmega169V, ATmega16L, ATmega32, ATmega323, ATmega323L, ATmega32L, ATmega64, ATmega64L, AT90CAN128， ATmega128, ATmega128L
JTAG ICE clone board Assembly Instructions.
Atmega16 40pin DIP microcontroller (programmed with Atmel JTAG ICE firmware)
RequirementsYou only need a soldering iron, some solder, a multimeter, soldering skills, AVR Studio, target board with 2.7 to 5.0V power supply. The JTAG ICE clone board is target board powered device. Target board is the development system where the debugged MCU resides.
Some items are non-returnable (semiconductors, microcontrollers, electronic kits).
