georgia-market.com moderated newsgroup and market bazzar > Warner Robins
> Cnc milling programming course
Cnc milling programming course
38 G code cnc training programs.
Windows 95/98/2000/2003/NT4/ME/XP/XP64/Vista
Adapt the programs to suit your requirements.
G codes and M codes are included for a quick and easy reference.
Free DNC program also available, to transfer your cnc programs to and from your cnc machine.
Also, free simulation software to test your programs (only simulates basic programs, not suitable for using sub programs or macros).
The programs will run on cnc milling machines that use G code programs, including Fanuc, Haas and Mitsubishi. Fanuc 0M controls will not run the macro programs. All of the programs are for 3 axis machines. You will receive the editing software as a download, and other software by email. Also, you will receive a manual containing all of the component drawings, as a pdf file (Adobe reader can be downloaded for free at their website). Below, is a list of the programs included.
Three drilled holes randomly spaced
Three reamed holes randomly spaced
Raised profile with circular arc
Circular boss using arc approach and depart
Milling of counterbored holes using I or J
Linear hole pattern using sub programs
Linear hole pattern using macro grid program
Linear offset hole pattern using sub programs
Tapped holes on linear hole pattern
Row of equally spaced reamed holes
Profiled recess with circular arc
Two identical profiled shapes using sub program
Two rows of holes using sub program
Milling slots with sub program
Milling slots with macro program
Two identical profiled shapes using mirror imaging
Four identical profiled shapes using mirror imaging
Two bolt hole circles using macro program
Holes in line on angle using macro program
Rectangular pocket with corner rads using macro program
Circular and rectangular pockets using macro programs
Linear offset hole pattern of tapped holes using sub programs
Holes on a pitch circle diameter
Two double bolt hole circles tapped, using bolt hole circle macro
Two double bolt hole circles on different levels, using bolt hole circle macro
Two identical profiled shapes with one rotated at 30 degrees
