georgia-market.com moderated newsgroup and market bazzar > Milledgeville
> Industrial
> Gel coat white w / wax one quart
Gel coat white w / wax one quart
WHITE GEL-COAT W / WAX ONE QUART
White Gel-Coat Used Over Fiberglass Surfaces. This Product is Designed to cure to a Tack-Free finish. Sanding is Required Between Coat where applicable. Contains wax-sol. Hardener is included. Requires addition of 1 – 2 % MEKP hardener by weight. May vary amounts of MEKP to slow, or speed, the curing process. Use no less than 1 % MEKP, no more than 3% MEKP. Mix thoroughly for 2 minutes. Pot life is approximately 15-20 minutes at 80 degrees Fahrenheit. Complete cure is approximately 45 minutes to 4 hours. Do not use under 60 degrees Fahrenheit. Clean surface with Acetone and wipe clean with a dry rag. Apply with brush, roller, or spray application. Apply approximately 20 mils, approximately the thickness of a dime, of gel coat. Covers approximately 20 sq. ft. per quart, or 80 sq. ft. per gallon. May add up to 4 % pigment, normally 1oz. per quart, or 4oz. per gallon by volume. May be thinned with Styrene, adding no more than 5% by volume.
I ALSO HAVE PINTS, QUARTS AND GALLON OF POLYESTER RESIN AND 1 YARD AND 3 YARDS PACKAGE OF FIBERGLASS MAT AND GEL-COAT IN PINTS, QUARTS AND GALLONS. ALL RESINS AND GEL-COATS COME WITH HARDENER.
