georgia-market.com moderated newsgroup and market bazzar > Macon
> Industrial
> Light Industrial
> Miller millermatic 350P/xr-aluma-pro package 907379
Miller millermatic 350P/xr-aluma-pro package 907379
The smartest, most productive Millermatic ever!
Adjustable Crater feature optimizes crater size for steel, stainless and aluminum applications.
Crater Time Delay allows deactivation of crater feature for tack or small welds.
Superior Aluminum Performance on thin material as low as 19 gauge with a direct connection for optional XR® push-pull guns or Spoolmatic® spool guns.
Exclusive Gun-On-Demand allows you to use either a standard MIG gun or a Miller Spoolgun without flipping a switch. The machine senses which gun you are using when you pull the trigger. No upgrade is required. Machine comes spoolgun ready right out of the box.
Built-in pulsed MIG programs (Millermatic 350P)- All programmed information is restored after each power up.
Easy-to-use digital user interface with backlit words and alpha-numeric displays for showing words and numbers.
SharpArc® optimizes the size and shape of the arc cone, bead width and appearance and puddle fluidity.
Fan-On-Demand cooling system only operates when needed reducing power consumption and keeping internal components cleaner.
Internal air flow that protects electrical components and PC boards from dirt, dust, debris... greatly improving reliability.
Keeps output of the power source constant regardless of fluctuation in input power ± 10%.
For aluminum welding, the optional XR-A Push-Pull Guns provide the ability to utilize 12 in. rolls of aluminum inside the Millermatic 350/350P for extended aluminum welding time and reduced labor time from changing 1 lb. rolls of aluminum wire.
See the Section on XRâ„¢-Aluma-Proâ„¢ Gun Features and Specification Below
Specifications for 350P Power Supply
* Requires 1- or 3-Phase power
* 300 A at 32 VDC, 60% duty cycle, 1- or 3-Phase
* 50 - 700 IPM (1.3 - 17.8 m/min)
XRâ„¢-Aluma-Proâ„¢ Gun Features and Specification
NEW! XR-Aluma-Proâ„¢ Push-Pull Gun Aluminum Welding System package available. With one stock number you get the best aluminum welding package.
Combine with Millermatic® 350P or XMT 350 w/XR Control for a total aluminum welding system. The XR-Aluma-Pro™ Gun is available in air- or water-cooled versions with 15, 25, or 35 ft (4.6, 7.6, or 10.6 m) cable lengths.
The XR-Aluma-Pro air-cooled gun offers 300 amps—more amperage than the competition can handle.
Aluminum-series-specific tension setting ensures smooth wire feeding performance with 4000 or 5000 series aluminum wires.
At 900 inches per minute, this gun will feed wire faster than any of its predecessors.
3-3/4 turn potentiometer provides better resolution when selecting the right wire speed for the job. The recessed WFS (wire feed speed) control offers durability
yet is easy to use while wearing welding gloves.
The easy-to-rotate, self-seating head tube allows for better access into tight spots, preventing leaks and providing excellent current transfer.
The XR-Aluma-Pro trigger has a wiping action to keep contact points clean for a more reliable electrical connection.
Trigger hold reduces fatigue by allowing operator to weld without holding trigger. (Feature available when paired with XR-Control.)
Isolated, common, knurled drive
roll helps reduce wear, reducing
Replaceable feed cable liner is designed to provide consistent arc performance. It also reduces parts cost and service time by allowing a simple means of removing and replacing liner
and not the complete feed cable.
Serviceability. This gun features a full-length Velcro®-seamed leather jacket with integrated strain reliefs for easy cable maintenance and protection. The gun also features quick connectors between the control cable and electrical components (trigger, motor, potentiometer).
Head tubes are standard Roughneck®, FasTip™
and are Bernard® Centerfire™ compatible. Guns are warranted for 1 year, parts and labor.
Easy access to drive assembly and removable head tube reduces service time. Pressure release lever allows drive rolls to be held open for wire changeover
* MIG (GMAW) with Aluminum and other soft alloy wire
* Typical Aluminum Fabrication
* Truck and Trailer Manufacturing
* Air: 300 A at 100% Duty Cycle
* Water: 400 A at 100% Duty Cycle
* .030 - 1/16 in (0.8 - 1.6mm) aluminum wire
* 70 - 900 IPM (1.8 - 23 m/min)
Max Spool Size Capacity on XR-Control
* Air-Cooled: 2.5 lb (1.1 kg) torch only
Millermatic 350P/XR-Aluma-Pro Push-Pull Gun Aluminum System comes complete with;
* 350P Power source included
* XR-Aluma-Pro Push-Pull Gun, Air-Cooled, 25 ft
* 10' Industrial power cord (without plug) for single- or three-phase
* Factory-installed gas solenoid
* Argon mix regulator/flow meter w/5 ft Gas Hose
* Factory-installed, low-mounted running gear/single cylinder rack
* Contact tips, .035 and .047 (3/64)
* .035/.047 in reversible U-groove drive rolls
CLICK HERE TO SEE THE FACTORY SPECIFICATIONS ON THIS MACHINE
