georgia-market.com moderated newsgroup and market bazzar > Macon
> Industrial
> Heavy Industrial
> New milltronics horizontal boring machine
New milltronics horizontal boring machine
Milltronics HMC70 Accessories are set up so you never need to purchase what you do not need.
* Built-in Programmable 1° Indexing Rotary Table
· Quill diameter 4.3" 110 mm
· Huge travels & table loads
47" x 59" Table Size, 86" x 63" x 61" x 20" Travels, Geared Two Speed 50 Taper, with Fanuc 18i control.
HMC – Horizontal Bar Machining Center Pricing
Effective March 1, 2006 Rev. A
Spindle Horsepower 1 minute / 30 minutes
· Massive Heavily Ribbed Cast Iron Construction
· Hardened and Ground Square Box Ways with Turcite
· Precision Ground Table Surface
· Heavy Duty #50 Taper Spindle with Two Speed Geared Head
· Air Blast Hose and Wash Down Hose
· Automatic Metered Lubrication with Low Lube Fault
· Precision Ground 55 mm Double Nut Ball Screws
· Conveyor/auger Chip Removal System
· Massive 11,000 lb Table Capacity
· Factory Installation and Setup
· Shop Mill™ Conversational Programming System
· Look-ahead Function with Dynamic Look-ahead
· 10.4" Dynamic Graphic LCD Display
· Scaling, Rotation & Mirror Image
· RS-232 Port with DNC Capability
High Speed Double Arm Style 60 Pocket ATC
90° Angle Plate 31" 800 mm Square
Facing Head with Telescopic Tool Holders
Heidenhain Scales for X, Y & Z Axis Available on Fanuc 18i only
Heidenhain Scales for W Axis Available on Fanuc 18i only
Contact Tool Offset Probing with Macros Consult Factory
Laser Tool Setter Consult Factory
Work Offset Probing with Macros Consult Factory
Bound Hard Copy Programming, Maintenance or Operators Manuals Price for each
440 - 480 to 208 - 240 Three Phase Requires 34 KVA transformer
Extended Parts Warranty from One to Two Years
On Site SDE Machine Installation, U.S. only Training may be purchased separately from Siemens or Fanuc if required
F.O.B Waconia, Minnesota USA; Prices do not include taxes, duties, transportation, rigging or start-up.
Milltronics reserves the right to amend or change without notice without incurring obligation.
Horizontal Bar Machining Center Specifications
Effective March 1, 2006 Rev. A
Horizontal Bar with Rotary Table
Table "T" Slots (# / width / center distance)
W Axis without Spindle Extension Support Sleeve
W Axis with Spindle Extension Support Sleeve
Spindle Center to Table Surface
Spindle Horsepower – Siemens System 1 minute / 30 minutes
Spindle Horsepower – Fanuc System 30 minute / Continuous
Front Spindle Bearing Diameter – ID / OD
Rear Spindle Bearing Diameter – ID / OD
Ball Screw Diameter / Pitch, C3 Grade, Double Nut
Front & Rear Ball Screw Bearings – ID / OD
Ball Screw Diameter / Pitch – C3 Grade
Front & Rear Ball Screw Bearings – ID / OD
Table Index Clamping Resolution
Positioning Accuracy X, Y, Z, W See note
Repeatability X, Y, Z, W See note
Positioning Accuracy B See note
Hydraulic Oil Type or equivalent
Parts: One year or 2100 hours, whichever occurs first, for normal failures.
Service: One year or 2100 hours, whichever occurs first, from dealer; available from factory during second six months if air ticket supplied.
Extended Parts Warranty for Second Year
Parts warranty for normal failures for up to two years or 4200 hours, whichever occurs first.
Floor Occupation Overall Length
Consult Factory For Detailed Requirements and Foundation Drawings
Seimens Power Requirements - 440 VAC, 50-60hz, 3Ø
Fanuc Power Requirements - 208-240 VAC, 50-60hz, 3Ø
Measurements performed with Renishaw laser and ballbar systems. Measurements are linear over entire travel.
Temperature changes and table loads may affect tolerances. Tolerances are guaranteed over 10" sq. area.
Centurion features covered under separate literature. For machine duty rating, see "Truth in Specifications" on www.milltronics.net.
Milltronics reserves the right to change specifications at any time without incurring obligation.
