georgia-market.com moderated newsgroup and market bazzar > Macon
> Industrial
> Heavy Industrial
> Lot 7 hydraulic couplings & fittings & valve camco +
Lot 7 hydraulic couplings & fittings & valve camco +
LOT OF 7 NEW METAL PARTS - I THINK THEY ARE HYDRAULIC COUPLINGS AND FITTINGS & A VALVE
HERE IS WHAT IS MARKED ON EACH ONE;
THERE ARE 3 MARKED METAL ALMOST CONE SHAPED PIPE FITTING ADAPTERS ? THREADED ON BOTH ENDS - THAT ARE APPROX. 6 1/2 INCHES LONG 1 INCH ACROSS ONE END AND 2 INCHES ACROSS THE OTHER END - MARKED 2X1 S/40 SP95A/SA234WPBN W/14268NB
THERE ARE 2 CURVED PIECES WITH A BOLT DOWN BRACKET ON ONE END THAT ARE APPROX. 7 INCHES LONG AND HAVE ABOUT A 2 INCH DIAMETER NON-THREADED HOLE ON EACH END - THE ONLY MARKINGS THAT I SEE ON THESE IS ON THE METAL BRACKET AND IT SAYS EATON 32
ONE IS A VALVE MARKED OPEN ON TOP AND WHAT LOOKS LIKE REROTEST 147 6R ON ONE SIDE AND CWP 500 A106 S018 (THESE NUMBERS ARE HARD TO READ) THERE IS ALSO A TAG THAT READS; CAUTION - SOFT SEAT OPEN VALVE BEFORE WELDING AVOID EXCESSIVE HEAT
2 PIECES I THINK ARE COUPLINGS ? CURVED AT ABOUT 90 DEG MARKED 1"C-H THEY ARE APPROX. 5 INCHES ALL THE WAY ACROSS THE LONG SIDE OF THE CURVE
2 FITTINGS MARKED CAMCO 304-3/4 SP114 MACH USA 52 150 - APPROX 2 1/2 INCHES ACROSS THE LONG SIDE OF THE CURVED FITTING THREADED ON THE INSIDE OF BOTH ENDS APPROX. 1 INCH INSIDE DIAMETER
ONE FITTING MARKED DIXON V C CO X X29 A M 8 USE CLIP WIRE OR NAIL - THREADED ON ONE END WITH A RUBBER GASKET IN THE OTHER END
ONE FITTING WITH 3 BIG OPENINGS AND 2 SMALL OPENINGS APPROX. 4 INCHES ACROSS - THREADED ON THE INSIDE OF EACH END AND OUT SIDE OF THE TOP - MADE OF ALUMINUM MARKED WR
THANKS FOR LOOKING - GOD BLESS
ANNOUNCEMENT: MY BEAUTIFUL BOY AND GIRL TWIN BABIES ARE ABOUT TO TURN 4 YEARS OLD.. I CAN HARDLY BELIEVE IT.. - CHECK OUT MY ME PAGE FOR BIRTH STORIES AND NEW PICTURES...
