georgia-market.com moderated newsgroup and market bazzar > LaGrange
> Construction
> Jet 13"X40" metal lathe, belt drive, m#bdb-1340A
Jet 13"X40" metal lathe, belt drive, m#bdb-1340A
Shars 3 pc. Part# 303-2651N Micrometer Set, a 49.99 value
· Tolerance test certificate included
· Helical cut headstock gears reduce noise
· Change gears allow metric threading
· Spindle is supported by precision tapered roller bearings
· V-way bed is induction hardened and ground
· Gap bed section provided for large diameter work
· Independent lead screw and feed rod
· T-slotted compound slide with 4-way tool post
· Carriage mounted spindle control lever
· Automatic feeding and threading are fully interlocked
· Feed selectors travel in grooved ways
Tailstock may be offset for turning tapers and includes an inch/metric graduated quill
· 6" 3-jaw direct mount chuck with top reversing jaws
· Centers with headstock center sleeve
Swing Over Cross Slide (in): 7-25/32
Distance Between Centers (in): 40
Hole Through Spindle (in): 1-3/8
Spindle Taper (With Sleeve): MT-5 (MT-3)
Range of Spindle Speeds (RPM): 60 - 1,240
Number of Longitudinal and Cross Feeds: 40
Range of Longitudinal Feeds (in/rev): 0.0036 - 0.1005
Range of Cross Feeds (in/rev): 0.0012 - 0.0345
Range of Inch Threads (T.P.I.): 4 - 112
Range of Metric Threads (mm): 0.2 - 6
Compound Slide Travel (in): 2-11/16
Cross Slide Travel (in): 6-5/16
Tailstock Spindle Travel (in): 3-3/4
Taper in Tailstock Spindle: MT-3
Steady Rest Capacity (in): 3-1/2
Follow Rest Capacity (in): 2-3/4
Overall Dimensions with Stand (L x W x H /in): 71 x 32 x 45 Main Motor: 2 HP, 1 Ph 230V Only
Add these items for only .99 cents each:
Shars 3 pc. Part# 303-2651N Micrometer Set, a 49.99 value
* Business with a dock or a forklift: FREE
* If a lift gate is needed (to a business address), add $100.00
* If going to a residence, add $200.00
LOCAL PICK UP / WILL CALL POLICY:
No local pick up on this item.
New Items: New items are covered by the manufacturer’s warranty policy. This info can be found by contacting the manufacturer or you can ask us about any specific warranty question and we will try to help. All E Bay items must be warranted through the manufacturer’s warranty center or the manufacturer themselves, NOT Rayco Industrial Supply. There may be an occasion where there is an exception to this rule but you must contact us for details.
“Contact Seller†or “Ask Seller A Questionâ€
(***)-576-1935 Ext. 213, M-F 8am to 5pm PST.
Thank you for looking and have a great day!
