georgia-market.com moderated newsgroup and market bazzar > Hinesville
> Industrial
> Heavy Industrial
> Starrett #252 height gage mint with wooden case
Starrett #252 height gage mint with wooden case
The Starrett No. 252 Height Transfer Gage is and ideal instrument for use with test indicators or electronic amplifiers to accurately transfer height settings from gage blocks, height gages and other standards. Gage is in very good used condition. Case has identification numbers on it with black marker does not affect performance or accuracy of this excellent tool but is cosmetic.
Accuracy and Long-Life Features
• Extreme rigidity provides the vibration-proof stability necessary to permit precise, repeat readings with indicators of the highest amplification
• Extremely rigid, rectangular box-type hollow column mounted integrally on a heavy base
• Because the adjusting mechanism is located in the base, the vertical column and indicator are isolated and not affected by an external influence such as heat or hand pressure
• Bottom of the base has three-point stability and smooth movement on the surface plate
• An adjustable slide, incorporating a snug for holding test indicators or electronic gage heads, has rapid vertical manual adjustment
• The slide can be locked at the desired height by a thumb screw
• The entire slide unit has fine vertical adjustment of approximately 3/8" (9.5 mm) relative to the fixed column by means of a knob on the base. This permits the slide with its test indicator to by quickly and precisely adjusted to the desired setting
• A snug on the slide provides two holes .375" (9.5 mm) and .156" (4 mm) diameter for holding gage rods or scribers. A 9" (225 mm) rod furnished with the gage is especially useful for reaching confined areas or reaching heights greater than the range of the gage
• The rod has a major diameter of .375" (9.5 mm) and two stepped diameters of 1/4" (3.2 mm) and 7/32" (5.5 mm) at one end and 5/16" (8 mm) at the opposite end. Starrett No. 196 Test Indicators can be mounted using Starrett snugs, Part Nos. PT99439 or PT99440 (snugs not furnished)
• A convenient wire retaining clip mounted on the movable slide keeps electronic gage head cables from deflecting the gage-holding rod
• Starrett No. 25, No. 81, No. 655 and be used on the height gage by means of a No. 657J Gage Rod (furnished). Other useful attachments (extra) are Starrett surface gage spindles [No. 57C or No. 57D, 12" (300 mm) and 18" (450 mm)] - which are extremely useful for scribing and layout
NEW LIST IS EVEN AT MSC! $1,068.30
7 1/2" L x 4 1/2" W (190 mm x 115 mm)
9" L x .375" Dia. (225 mm x 9.5 mm) with steps
BE SURE TO SEE OUR STORE FOR MANY MORE NICE TOOLS INCLUDING RADIUS DRESSERS,INSPECTION TOOLING , GRINDING VISES,MATCHED PAIRS OF GRINDING VISES, MATCHED PAIRS OF ANGLE PLATES AND MATCHED PAIRS OF VBLOCKS OF ALL STYLES AND MANY OTHER NAME BRAND TOOLMAKER TOOLS!
Questions? Contact us ****@windstream.net
