georgia-market.com moderated newsgroup and market bazzar > Dalton
> Industrial
> Motorola XTS3000 model 3 vhf imbe apco P25
Motorola XTS3000 model 3 vhf imbe apco P25
* XTS-3000 radio (see details below)
* New Motorola Impres charger (WPLN4114AR) - This charger came with the XTS-5000 I recently purchased, and has V2.0 firmware. I've already got an Impres charger, so I'm including this one in this package.
* Radio dust/accessory port cover
* 2 used, but good condition, Impres batteries. One is a NOS battery with less than 5 charges on it, the other has about 80% total charge capacity.
* 2 Wire Surveillance Earpiece With MIC/PTT (BDN6667A)
* Audio adapter for above (BDN6676)
Annual preventive maintenance and full alignment performed in January by my local authorized Motorola Service Shop, with no problems reported.
Last programmed with CPS R05.02.00
Radio's Flashcode is 590001-001800-9 which decodes to:
H14 Enhanced Digital ID Display
Q498 Hardware Multikey Encryption w/ OTAR
H35 Conventional Systems Operation
Q947 APCO Packet Data Interface
Decoded by akardam.net FC Decoder
The radio has a very small scratch on the upper left hand part of the LCD that's barely visible. The scratch does not obscure anything on the display. The LCD is clear and bright. Until recently, the radio was in daily use monitoring public service communications (about 50% P25) and on the ham bands. Receives both analog and P25 transmissions very well, and gets reports of good audio from local hams. In the interest of full disclosure: I have had problems receiving one of the more unusual local P25 channels with this radio - I have no idea if this problem is due to the channel, my programming, or the radio. All other analog and P25 channels (both full-time P25 and mixed analog/P25) are received fine. Radio had its annual preventive maintenance testing and including a full alignment performed in January by my local authorized Motorola Service Shop.
