georgia-market.com moderated newsgroup and market bazzar > Columbus
> Industrial goods and materials
> Guar passes self test rod-l M150AC hipot hi-pot tester
Guar passes self test rod-l M150AC hipot hi-pot tester
NO RESERVE!!!! SELLS FOR $8000.00- Guaranteed 100% Evey Function!! Factory Certificate -Not to Be D.O.A.!! Powers up Ready - Passes Full Test!! Xlt- Rod-L M150AC ,Comes with FULL SERVICE MANUAL + Operating INSTRUCTIONS!!!! - IEEE-488 Bus-Compatible Hipot Test System * Safe, Fast, Efficient * Fully programmable test parameters * Digital display * Performs an AC dielectric strength (Hipot) test concurrent with a ground continuity test * Applies a test potential of up to 5000 VAC at 50 milliamps (user programmable ) * Performs tests in full compliance with UL, VDE, BSI, IEC, CSA, and other test standards IEEE-488 BUS-compatible - enables data logging during each test, and remote programming of: * Test Voltage * Test Time * Voltage Ramp Rate * Real Current Trip Point * Total Current Trip Point * Under Current Trip Point Detects and indicates the following events: * Test Ready (Security Chassis Ground Sensed) * Test in Progress * Test Passed * Test Failed: * Arcing * Excessive Total Leakage Current * Excessive Resistive Leakage Current * Under Current * Lack of adequate Chassis Ground Superior Safety Features * Visual and Audible alert indicating Hipot test in progress * Low Current Security Chassis Ground Circuit (ensures Device Under Test has ground connection of 0.5 ohm between chassis and power cord ground pin) * Fast HV shutdown within 2 milliseconds of HV test automatically on test failure or on command Specifications * Output Test Voltage*: 100 VAC - 5K VAC * Output Voltage Ramp Time*: 50 V/sec to 5k V/sec * Total Current Trip Point*: 50 mA (maximum) * Real Current Trip Point*: 5 mA (maximum) * Under Current Trip Point*: 5 mA (maximum) * Test Time*: 1 sec - 100 sec * Shutdown Time: 2 milliseconds * Arc Detection: Arc duration 10µS or greater * Ground Continuity: Low current ( 1.5 Amp @ 1.5V ) * Input Power Required: 115 / 230 VAC ± 10%, 47 - 63 Hz, 250 watts maximum>> ,Power Cord- Need more info?? Email me
