georgia-market.com moderated newsgroup and market bazzar   >   Augusta   >   Industrial   >   Hobart airforce 625 plasma cutter 500493

Hobart airforce 625 plasma cutter 500493


YOUR SOURCE FOR WELDING SUPPLIES
WELDING EQUIPMENT - SAFETY SUPPLIES
ARCAIR SLICE PACKS - LENCO SPOT
The Airforce™ 625 is a portable plasma arc cutter that can produce a 5/8 inch quality cut and has loads of features that make your cutting needs a breeze. Rated cut of 1/2 in (steel) at 10 in per minute. Can sever 7/8 in with new consumables and proper technique. The ICE-40C torch is ergonomically designed to increase comfort, and the safety trigger prevents accidental starts. Pilot Arc Controller improves tip life and maintains uninterrupted cutting.
* ICE-40C hand-held torch with 25 ft (7.6 m) cable or 50 ft (15.2 m) cable
* 25 ft (6.1 m) or 50 ft (15.2 m) heavy-duty work clamp
* Extra consumables (3 electrodes, 3 tips and 1 air fitting)
* 12 ft (3.7 m) industrial power cord and plug
* Body shops and fabrication
* Wind Tunnel Technology™ prevents abrasive dust and particles from damaging internal components.
* Fan-on-Demand™ cooling system operates when needed, reducing the amount of airborne dust/dirt pulled through the unit.
* Power factor correction draws 30% less amperage than the competition for the same cutting range, and expands operator's work area via extension cords while minimizing nuisance trips caused by voltage drops.
* Starts without high frequency - will not interfere with or damage controls or computers.
* LVC™ line voltage compensation provides peak performance power under variable input voltage conditions (176-264 V) for steady cuts and cleaner ending cuts.
* Plasma Cutting GuidePlasma Cutting Guide #195 981: Cut straight lines or circles up to 12 in diameter with ease.
* Cutting Guide Suction/Magnetic Base with Extension Arm #195 979: Add this to your cutting guide for convenient attachment to all flat surfaces. The extended arm accommodates holes up to 30 in diameter.
* Standoff Roller GuidePlasma Standoff Roller Guide #194 883: Helps maintain recommended standoff distance to maximize cutting performance and improve tip life.
* #30A Running Gear#30A Economy Running Gear and Cord Wrap #195 093: Economical running gear with angle for easy front panel access provides storage for gloves and tools.
Rated Output at 50% Duty Cycle
Amps Input at Rated Output, 50/60 Hz
(#500 493) 208/230/ VAC, 50/60 Hz, w/ 25 ft torch
6 CFM (170 L/min) at 75 PSI (517 kPa)
___________________________________________________________________________________________________
B & R WELDER REPAIR SERVICE INC.
4412 SOUTHERN BUSINESS PARK DRIVE
Hours : Mon-Fri 8-5 Sat 9-12 EST
Email questions to : ****@radix.net
we only accept wire transfers. Please call for our banking info.
Personal checks take 2 weeks to clear



Hobart airforce 625 plasma cutter 500493