georgia-market.com moderated newsgroup and market bazzar > Augusta
> Electronics
> Pk neuses N3328, N2878, N2060 & N287(4 different tools)
Pk neuses N3328, N2878, N2060 & N287(4 different tools)
BELOW ARE THE SPECS ON THE TOOLS:
For stripping the jacket from all sizes of plastic and fabric covered cable. Red, rigid, phenolic handle equipped with a razor blade at one end with an "L" shaped hardened steel guide and blade guard. Handle shaped to fit worker's hand and so constructed that hand is fully protected from skinned knuckles through contact with the cable jacket. Stainless steel saddle with heavy nickel plated screws and screw bushings hold the guide and blade in place.
Operator holds Cable Sheath Stripper in one hand and guides cable with the other. Cable jacket is slit nearly and cleanly without damage to wire or insulation.
Blade may be reversed for new cutting edge. Two extra blades are carried in the slot under the name plate. Blades are standard Schick injector blades - inexpensive -easily obtainable.
N-2060 Cable Ring Cutting Tool
For "ring" cutting the sheating of inside type plastic, fabric or rubber covered cable. Cut through sheathing limited to .031" (.787mm) or .018" (.457mm). This tool is most practically suited for the customary inside type 3/16'' (4.7mm), 1/4" (6.4mm), 3/8" (9.5mm) or 1/2" (12.7mm) cables, but will handle thin sheathed cable up to 1" (2.5cm) in diameter. Cable is pushed into tool and against the spring. Back pressure holds the cable against the cutting blade. And accurate 0.31" (.787 mm) or .018" (.457mm) deep cut is made when the tool is rotated around the circumfrence of the cable.
(Evans type) Curved notched sewing needle with anodized aluminum handle. OAL 5 5/8" (14.29 cm).
Hand operated tool for removal of 22 or 24 guage wire from terminals. Retractable sleeve protects extractor head. Insulated handle and tip. OAL 6 3/8" (16.2 cm).
