georgia-market.com moderated newsgroup and market bazzar > Athens
> Industrial
> Heavy Industrial
> Intelligent instrumentation TM2500 data entry terminal
Intelligent instrumentation TM2500 data entry terminal
Intelligent Instrumentation TM2500 Data Entry Terminal
Used - One Unit Has "Dimples" On The Plastic Covering (see photo below) - Guaranteed NO DOA
Please note these are the units only - no cables, cords, adapters, etc.
Intelligent Instrumentation TM2500 Data Entry Terminal
The display is a 16-character LCD with large, easy to read characters. An 80-character display buffer with scroll keys allows the operator to slide the 16-character window across the 80-character line. The high contrast display on the terminals provides sufficient alphanumeric display capability for most panel-mount applications.
The case for the TM2500/2700 is designed for either surface or recessed mounting. The keyboard and display are sealed in the ABS plastic case that when properly mounted, protects the terminal against dust and moisture.
Three modes are available. The modes are as follows:
* Setup mode allows the maintenance personnel to establish the terminal operating parameters interactively from the keyboard. Prompts guide the operator through the selection of baud rate, protocol, and other parameters.
* Character mode operation is similar to that of a standard CRT. In this mode all entered characters are immediately sent to the host computer; the user selects whether the characters are displayed locally before transmission. The host computer has full control of screen format and of the location of the visible display window. The window and cursor can be scrolled in four directions using relative cursor positioning characters.
* In Block mode, terminated blocks of data are transmitted and received by the terminal, allowing operators to compose and correct messages before sending them to the host system.
The standard commands are as follows:
* p - Poll terminal for output
* h - Control function key backlights
* d - Set display characteristics
* i - Insert function message in output stream
* b - Backup parameters in nonvolatile EEPROM
The programmer is given a powerful set of command or Escape sequences with which to control terminal operation. With the exception of communication-related functions, options selected from the keyboard in Setup mode may also be changed by the host computer. All commands supported by Intelligent Instrumentation's on-line terminals are supported by the TM2500.
Display - 16-character alphanumeric LCD with adjustable viewing angle
Character Size - 0.38" (9.66mm) character height
Display Buffer - 80-characters
Keyboard - Sealed, molded silicon rubber
Operation Life - One million operations
Function Keys - Six, programmable, backlit
Indicators - Audible tone, flashing display, 6 LEDs
Communications - RS232C, point-to-point
Power - 5VDC or 7.5 to 10VDC at 250mA max
Operating Temperature - 0° C to +50° C (32° F to 122° F)
Storage Temperature: -20° C to +70° C (-4° F to +158° F)
Dimensions - 180.4mm x 104.2mm x 26.9mm (7.102"W X 4.102"H X 1.060"D)
Mounting - Flush or surface mounted
Case - Dust and moisture sealed ABS plastic
Altitude - 50,000 feet nonoperational, 15,000 feet operational
Temperature Rating: -20° C to +70° C storage, 0° C to +50° C operational
Keypad Service Life - One million operations
Vibration - Search: 5-55Hz in three planes / Cycling: 55-500-55Hz at 3G's
Mechanical Shock - 30G's with duration of 11ms
Radio Interference - Meets FCC Class A compliance
Conducted Interference - Meets FCC Class A compliance
Radio Susceptibility - 2.0V per meter over 14kHz-10GHz in vertical or horizontal sweep
Bench Drop Test - 4" or 45 degree pivot drop to 1 5/8" thick bench
Glide mouse over small images to see enlarged view below.
* We don't have history or type of use of any item.
* All of our products are pulled (used) unless stated otherwise.
* We do not include operating systems, drivers, cd's, or software unless specified in the description.
* We are not responsible for compatibility issues with your system or software.
* We do not provide technical support for setup, installation, or any other user-related issues.
* We are as accurate as possible in our descriptions and We always show the defects on the pictures if there is any.
