georgia-market.com moderated newsgroup and market bazzar > LaGrange
> Industrial
> Miller suitcase x-treme vs feeder 195500 buysafe
Miller suitcase x-treme vs feeder 195500 buysafe
MILLER SUITCASE X-TREME VS FEEDER 195500
.You can call me at (***)-854-7380 FROM 5:00AM-7:00PM PT, 7 DAYS A WEEK
SUITCASE X-TREME VS WITH BERNARD Q300 AMP MIG GUNTaking portable welding to the extreme - this portable feeder has every feature you will ever need.
*drive roll kits must be ordered separately
Internal components are protected from damage by thermal overload protection which automatically shuts down the unit if duty cycle is exceeded or air flow and cooling are restricted.
New! Polyproplyene case with built-in slide rails and the ability to open the door to change wire with the feeder in a vertical position.
Digital meters with SunVision technology are standard for voltage and wire speed, and can also display amperage if desired. Meters can be seen clearly even in direct sunlight.
Potted and trayed main printed circuit board for the harshest environments adds exceptional reliability. Board has full-trigger isolation so a shorted gun trigger will not affect feeder operation.
Improved contactor and overall duty cycle for high-amperage applications (425 A at 60%)
Trigger hold, wire jog, and gas purge are all standard and located on front panel.
Wider voltage range for small and large wires with no contactor chatter or arc outages.
New! Double-filtered gas valve helps keep dirt from clogging and affecting gas flow.
Excellent starts and improved superior arc performance for all types and sizes of wires whether using CV or CC power supply. Best low-end CC arc in the industry.
SUITCASE X-TREME VS Accessories
FC-1260 Ironmate Gun, 350 A, 10 ft
The Ironmate Guns are for feeding self-shielded (gasless) flux cored wires. They are an ideal match for Miller Super S-32P, and Suitcase wire feeders.
FC-1260 Ironmate Gun, 350 Amps, 15 ft
The Ironmate Guns are for feeding self-shielded (gasless) flux cored wires. They are an ideal match for Miller Super S-32P, and Suitcase wire feeders.
Roughneck C-4012 Gun 12FT .035-.045 Wire
Fully compatible with all current Miller wire feeders and Millermatics. They are also adaptable to other major brands of welding equipment.
Roughneck C-4015 Gun 15FT .035-.045 Wire
Fully compatible with all current Miller wire feeders and Millermatics. They are also adaptable to other major brands of welding equipment.
Roughneck C-4010 Gun 10FT .035-.045 Wire
Fully compatible with all current Miller wire feeders and Millermatics. They are also adaptable to other major brands of welding equipment.
Roughneck C-3012 Gun 12FT .035-.045 Wire
Fully compatible with all current Miller wire feeders and Millermatics. They are also adaptable to other major brands of welding equipment.
Roughneck C-3010 Gun 10FT .035-.045 Wire
Fully compatible with all current Miller wire feeders and Millermatics. They are also adaptable to other major brands of welding equipment.
Roughneck C-3015 Gun 15FT .035-.045 Wire
Fully compatible with all current Miller wire feeders and Millermatics. They are also adaptable to other major brands of welding equipment.
For use with 14 lb (6.4 kg) spool of Lincoln self-shielding wire.
KIT,DRIVE ROLL .023 V-GR 2 ROLL
KIT,DRIVE ROLL .030 V-GR 2 ROLL
KIT,DRIVE ROLL .035 V-GR 2 ROLL
KIT,DRIVE ROLL .035 VK-GR 2 ROLL
KIT,DRIVE ROLL .040 V-GROOVE 2 ROLL
KIT,DRIVE ROLL .045 V-GR 2 ROLL
KIT,DRIVE ROLL .045 VK-GR 2 ROLL
KIT,DRIVE ROLL .047 U-GR 2 ROLL
KIT,DRIVE ROLL .052 V-GR 2 ROLL
KIT,DRIVE ROLL .052 VK-GR 2 ROLL
KIT,DRIVE ROLL 1/16 U-GR 2 ROLL
KIT,DRIVE ROLL 1/16 UC-GR 2 ROLL
KIT,DRIVE ROLL 1/16 V-GR 2 ROLL
KIT,DRIVE ROLL 1/16 VK-GR 2 ROLL
KIT,DRIVE ROLL 5/64 UC-GR 2 ROLL
KIT,DRIVE ROLL 5/64 VK-GR 2 ROLL
* 14 - 48 VDC Open Circuit/ Arc Voltage
* Solid Wire: .023-5/64 in (0.6-2.0 mm)
* Flux Cored: .030-5/64 in (0.8-2.0 mm)
* 50 - 780 IPM (1.3 - 19.8 m/min)
Summary of My Selling Policies
Read my policies on my summary
